Customer Demand Trade Name Specification/mm Remark Tm:YLF 3*3*20mm Double Polished, Coated Processing index: Material: Tm:YLF crystal Concentration:3.0% Size: 3*3*20mm Polishing: 3*3 double-sided laser grade polishing Coating: 3*3 double-sided AR@1800-2550nm Picture of Shipment
Customer Demand Trade Name Specification/mm Remark 2%Yb:CaF2 Crystal DIA10 *10 mm (Dimensional Tolerance:+/-0.05mm) Double polishing Coating film Processing index: Coating,2% Yb, no Na, low temperature At low temperature, (80K), at room temperature, the absorption rate is about 92%@980nm Double-sided polishing (on dia 10 mm surface) Polishing: Laser grade The highest damage coating is >10J/cm2 The side cylinder area is gold-plated Surface quality: 20-10; S-D (after coating) Flatness: L/8@632 nm Verticality: <15′ Parallelism: <15″ Picture of Shipment
Customer Demand Trade Name Specification/mm Remark 5%YbKGW 3*3*5mm Crystal direction: Np End toss (3*3mm) uncoated 5%YbKGW 3*3*2mm Crystal direction: Np End toss (3*3mm) uncoated Processing index: Diameter：3(+/-0.1)×3(+/-0.1)mm Thickness：2(+/-0.1)mm Angle Tolerance：Np-cut+0.5° Surface Quality：≤40-20 Flatness： ≤λ/6@633nm Wavefront Distortion：≤ λ/4@633nm Parallelism： ≤30sec Perpendicularity： ≤15min Chamfer Width： ≤0.1mm×45° Clear Aperture： ≥90% Picture of Shipment
Customer Demand Trade Name Specification/mm Remark Cr:ZnSe 2*2*2.5mm Double toss Processing index: Orientation Tolerance: < 0.5° Thickness/Diameter Tolerance: ±0.10 mm Surface Flatness: <(λ/2-λ/4)@632nm Wavefront Distortion: <(1-2)λ@632nm Surface Quality: 60/40 Parallel: 1ˊ Perpendicular: 30ˊ Clear Aperture: >90% Chamfer: <0.2×45° Picture of Shipment
Customer Demand Trade Name Specification/mm Remark Er,Yb:YAB 3*3*1.5 mm C cut, double throw, uncoated Processing index: Orientation Tolerance: < 0.5° Thickness/Diameter tolerance: ±0.10 mm Surface Shape (Flatness): <(λ/2-λ/4)@632nm Wavefront Distortion: <(1-2)λ@632nm Surface Finish: 60/40 Parallelism: 1ˊ Verticality: 30ˊ Clear Aperture: >90% Chamfering: <0.2×45° Picture of Shipment
Customer Demand Trade Name Specification/mm Remark Er, Yb:glass 2*2*2.5mm Coated sheet Processing Index: Concentration: greater than 1.19% Dimension tolerance: Length and width (0/-0.1) mm Thickness tolerance: ±0.1mm Finish: 10/5, surface type: λ/10 Parallelism: 20″ Coating (2*2mm double-sided coating) S1 side: AR@940+HR@1535nm Side S2: AR@1535nm Picture of Shipment
Customer Demand Trade Name Specification/mm Remark Er, Yb: glass 2*2*2.5mm 940AR/1535HR-1535AR Processing Index: Orientation Tolerance: < 0.5° Thickness/Diameter Tolerance: ±0.10 mm Surface Flatness: <(λ/2-λ/4)@632nm Wavefront Distortion: <(1-2)λ@632nm Surface Finish: 60/40 Parallelism: 1ˊ Verticality: 30ˊ Clear Aperture: >90% Chamfering: <0.2×45° Picture of Shipment
Customer Demand Trade Name Specification/mm Remark Ti: sapphire 4*4*30mm Brewster Angle cut, double polished, uncoated Absorption>90% Ti: sapphire Ø4*15mm Concentration:0.1%TiØ4*15mm Brewster Angle cut, double polished, uncoated Processing index: Orientation Tolerance: < 0.5° Thickness/Diameter Tolerance: ±0.10 mm Surface Flatness: <(λ/2-λ/4)@632nm Wavefront Distortion: <(1-2)λ@632nm Surface Quality: 60/40 Parallel: 1ˊ Perpendicular: 30ˊ Clear Aperture: >90% Chamfer: <0.2×45° Picture of Shipment
Customer Demand Trade Name Specification/mm Remark Cr: ZnSe polycrystalline 2*4*5mm 2*4 double-sided polishing Processing index: Tolerance: ±0.05mm Finish: 40/20 Flatness: λ/8@633nm Parallelism: <30″ Clear aperture: >90% Through: in the range of 3.9% through 5mm@1650nm Require: 1) Two 2*4mm surface polishing 2) Be sure to ensure the crystal quality Picture of Shipment
Customer Demand Trade Name Specification/mm Remark Er,Yb: glass 25mm*3mm*8mm blank Processing Index: Size: 25mm*3mm*8mm Picture of Shipment
